Why are my Doodles not coming off of the Start DoodlePad?

We have two DoodlePads available, one for the Create and the PRO, and one for the Start. To ensure you are using the correct products with your DoodlePad, please check here: www.the3doodler.com/compatibility

The 3Doodler Start DoodlePad is only compatible with 3Doodler Start Eco-Plastics. Please do not use any other filaments with this DoodlePad. You can gently bend the DoodlePad to pop the Doodles off. Doodles might become damaged in the removal process, and may require mending. If you have any difficulties removing your Doodles, please email us at [email protected] and we will be happy to assist you!

Can I use the Doodlepad with all of the PRO Filaments?

The Create Doodlepad IS NOT compatible with Flexy, Wood or Metal.

Note that these filaments will leave residue on your DoodlePad. Masking tape will get most of the pieces off, but using them may still damage your DoodlePad.

You can use the Create DoodlePad with all other PRO filaments.

Please ensure you are not using the 3Doodler Start DoodlePad, which is not compatible with the Create, the PRO, or their accessories. You can reference the compatibility chart here to make sure: www.the3doodler.com/compatibility

Why is the plastic not coming off of my Create/PRO DoodlePad?

We have two DoodlePads available, one for the Create and the PRO, and one for the Start. To ensure you are using the correct products with your Pen and your DoodlePad, please check here: www.the3doodler.com/compatibility

COMPATIBLE: ABS, PLA, Nylon, Polycarbonate

NOT COMPATIBLE: FLEXY, Wood, Nylon, Metal, Eco-Plastic

Do not press the nozzle directly onto the DoodlePad, as filament may adhere to the surface. You can bend the DoodlePad to easily pop your Doodles off. Sometimes, Doodles may need to be removed with a putty knife. Doodles might become damaged in the removal process, and they may require mending.

If you have any difficulties removing your Doodles, please contact our customer support at [email protected] and we be happy to assist you!

How do I use the DoodleBlocks™?

Simply draw into the grooves of the DoodleBlock™ to form a shape, wait 10-15 seconds for the plastic to harden and then bend the DoodleBlock™ to release your Doodled shape. You can then fill in the shape if you want, making it more solid. Once you’ve traced all the pieces, you can then use your 3Doodler Start to join them together to form your finished 3D creation.

Can I use the Create/2.0 Jetpack with my 3Doodler PRO?

No. You must use the new model of the JetPack with the 3Doodler PRO. The new Jetpack uses 5V/2A, whereas the older model of the JetPack uses 5V/1.2A and cannot power the PRO. The 3Doodler PRO requires the new model of the JetPack. The amperage is listed on the underside of the JetPack if there is any confusion.

The new version of the JetPack is compatible with the 2.0 and the Create.

Both the older model of the JetPack and the new model have an MAH reading of 4400.

How does the foot pedal work?

Created specifically for more versatile 3Doodling, the pedal connects to the 3Doodler to give you the freedom to Doodle from various angles and for longer periods of time, without holding down the pen’s extrusion buttons.

The long cable coming from the Pedal connects to the control port on the 3Doodler, which is located next to the On/Off switch.

Put your foot down, and Doodle on, and on, and on…