3D Pen Faqs

Related FAQs

• Why is the plastic not coming off of my Create+/PRO+ DoodlePad?

  We have two DoodlePads available, one for the Create+ and the PRO+, and one for the Start. To ensure you are using compatible products, please check here: www.the3doodler.com/compatibility Compatible: ABS, PLA, NYLON (PRO+ pen only) Compatible on Backside of DoodlePad Only: FLEXY, WOOD, Metal (PRO+ pen only) Not Compatible: Start Plastic (Start DoodlePad only) Do not press the nozzle directly onto the DoodlePad, as filament may adhere to the surface. You can bend the DoodlePad to easily pop your Doodles off. Sometimes, Doodles may need to be removed with a putty knife. Doodles might become damaged in the removal process,…

• How do I switch between filaments properly when using the PRO+?

  With the pen turned on and set to the temperature of the filament in the pen, carefully remove the nozzle using the nozzle removal tool. With the nozzle removed, if the material is long enough, simply reverse the plastic out of the back of the pen. If needed, insert the unblocking tool through the nozzle-end of the pen to push any remaining filament out through the feed port. Once the previous filament is cleared, you can set the pen to the next filament’s temperature and begin Doodling. If the material is not long enough to be seen out of the…

• Can I use the 3Doodler Start with my Create DoodlePad or other 3Doodler Create Accessories?

  No, the 3Doodler Start is not compatible with any of the 3Doodler 1.0, 2.0, or Create products or accessories, including Plastic Strands, DoodlePad, Nozzle Set, JetPack, Doodlestand, or Pedal. The only exception is the Project Book, which we encourage using for 3Doodler Start projects too.