How do I switch the display from Celsius to Fahrenheit on the PRO+?

Through the main menu, you can select SEL in order to choose whether C or F displays on the LCD screen. Simply use the Navigation Buttons to choose between C and F on the screen, then hit the enter. Once selected, you will be redirected to the main menu. The temperature display will be saved for future use.

Category: Pro

Related FAQs

  • How do I switch between filaments properly when using the PRO+?

    With the pen turned on and set to the temperature of the filament in the pen, carefully remove the nozzle using the nozzle removal tool. With the nozzle removed, if the material is long enough, simply reverse the plastic out of the back of the pen. If needed, insert the unblocking tool through the nozzle-end of the pen to push any remaining filament out through the feed port. Once the previous filament is cleared, you can set the pen to the next filament’s temperature and begin Doodling. If the material is not long enough to be seen out of the…

  • How do I adjust the temperature on the PRO+?

    Use the two arrow keys to scroll and find the preset temperature of the material you'd like to use. Once you've found it, use the select key underneath the display to lock in the desired material setting. Alternatively, you can use custom mode (see user manual).

  • How do I remove the nozzle on the 3Doodler PRO+?

    To remove the nozzle of the 3Doodler PRO+, you must have the pen turned on and heated to at least 180 degrees Celsius / 356 degrees Fahrenheit. Any of the pre-set material temps other than wood will be hot enough. Using the included nozzle set (which has a nozzle removal tool built into it), unscrew the nozzle in a counterclockwise direction. When replacing the nozzle, make sure the pen is at least 180 degrees Celsius / 356 degrees Fahrenheit, and screw it back on with the nozzle set in a clockwise direction. It is important that you do not over-tighten…

Close-up: 3D pen art cake with sticks design

Get Inspiration in Your Inbox

Sign up to be the first to have our latest 3D pen lessons, stencils, deals, and discounts (yay!) deposited directly in your inbox.

You have Successfully Subscribed!