Leaning Tower of Pisa

Doodle a toppling tower of your own

Instructions

1. Draw out all the pieces in Make 6 2. Connect each bottom of the windows (non-stripy edges) to the inner edges of the big octagon 3. Connect the smaller octagon to the tops of the windows 4. Draw out all the pieces in Make 1 5. Connect each bottom of the windows (non-arched edges) to the outer edges of the octagon 6. Connect the tops of the windows of section 1 to the outer edges of the larger octagon of Make 6 7. Draw out all the pieces in Make 2 8. Connect each bottom of the windows (non-arched edges) to the outer edges of the octagon 9. Connect the tops of the windows (arched edges) to the outer edges of the octagon to the bottom of Make 1 10. Repeat Steps 7 through 9 with Make 3,4 & 5 11. Choose whether you want the tower to lean on tow blobs or a rectangle. If you want two blobs: draws blobs about 5-6mm long off two adjacent points on the bottom of the octagon of Make 5
Download
Category: build